Skip to Content

Energy management best practice: a guide to energy efficiency for business

Measure first, then save: how smart meters and the HAZER IoT platform show where electricity goes and how to cut the bill.
November 17, 2026 by
Energy management best practice: a guide to energy efficiency for business

Electricity is one of the biggest running costs for any business, and for large companies it can be enormous. Many respond by buying solar panels or new equipment. That can pay off, but it can also cost more than it saves. Before investing, answer two questions: how much electricity do you use now, and which sites and appliances cost the most?

Key takeaways

  • Measure before you invest: you cannot cut what you cannot see.
  • Smart meters on the distribution board show use per site, room and appliance in real time.
  • Alerts, remote control and automatic rules turn data into savings from day one.

You do not need a team of engineers auditing your buildings for weeks to answer them. You need energy monitoring on the HAZER IoT platform.

What energy monitoring does

  • Shows electricity use across all your sites, and for each appliance.
  • Detects problems in your power infrastructure and helps you deal with them.
  • Produces reports on consumption and grid faults.
  • Lets you switch equipment on and off from a laptop or phone.

How it works

  1. A smart meter goes on the distribution board. It measures the electricity used by lighting, air conditioning and other fixed equipment, and by everything plugged into the sockets.
  2. The meter sends data to HAZER. It comes pre-configured and reports in real time, directly when you are on site or through an IoT gateway when you are not. Existing equipment that can connect to the internet can report directly.
  3. The manager opens the dashboard. Coloured widgets show live consumption. When use runs too high, the widget changes colour and an alert goes out.

The platform does the real work

HAZER takes data from energy meters, power analysers and protective relays and shows:

  • Widgets for each appliance, board, room or site.
  • Alerts when something needs your attention.
  • Live consumption charts.
  • A map of where problems occur.

It can also act. Left the air conditioning on when you locked up? Switch it off from your phone. Rules can run automatically too: cut power to equipment when the voltage spikes, or start the backup generator when the mains fail.

How it cuts the bill

  • A live bill. See this month's cost as it builds up, with an alert before you go over budget.
  • The biggest users first. Find the appliances and sites that drive the bill and start there, so savings come back faster.
  • Peak demand. See what causes your peaks and spread the load across the day.
  • Before and after. Compare periods to see what each saving measure really achieved.

There are other gains too: fewer breakdowns caused by power faults, no more meter readings with pen and paper, and less downtime from power cuts. Traditional audits give you history and savings months later. Live data lets you start saving now.

Simple to start

KLOUDIP fits and configures the meters; you open a laptop and start monitoring. HAZER runs in the cloud, so there is no server to buy. The cost depends on how many sites and appliances you connect, so small businesses can start small and large ones can scale.

Frequently asked questions

Do we need to change our wiring?

No. The meter is added to your existing distribution board.

Can I control appliances remotely?

Yes, where the equipment is connected through a controllable relay or supports remote commands.

Is energy monitoring worth it for a small business?

Often yes. Knowing which equipment drives the bill is the cheapest first step before any investment in new equipment or solar.

Talk to us

Want to see where your electricity goes? Ask us for a live demo. Contact KLOUDIP

First published on KLOUD LIVE in February 2022. Updated and revised in November 2026.